LEB-35 Standard

The ultrasonic welding press LEB-35 Standard is suitable for welding operations of thermoplastic parts of small size. This machine is more suitable for small welding parts with tiny electrical parts or chips inserted.

Suitable for the assembly into special purpose machines or automation
Dove-tail main column, no deflection during stroke movement
Easy tool changing, only need one wrench for replacement
Welding travel can be adjusted by vernier screw. Accuracy: 0.01mm
4-corner base with screws for horizontal adjustment
Linear roller rail is used, no deflection during downward stroke
There are optional travel measurement unit, pressure trigger unit, and digital controll for raising quality and effeciency
CE operating mode is available

Feature	Value
Input Power Supply	190 - 265 VAC / 50 - 60 Hz , Single Phase, Supplied from generator
Size	H 886 - 1066 x W 316 x D 525 mm
Weight	40 kg without generator
Color	RAL3020, other color is upn request.
Display	Pressure Gauge
Frequency Range	35 kHz: 34700 - 35150 Hz
Safety	CE standard
Switches	Dual-palm buttons with Emergency Stop at front
Drive Type	Pneumatic double acting air cylinder Ø80mm
Drive Energy	Compressed air supply: 7 bar maximum, 6 bar nominal Max. consumption at 6 bar: approx. 2.5 IIN/ stroke
Maximum Force	745N at 6 bar compressed air
Stroke Movement	Fast advance, short braking and gentle set down
Maximum Travel	100mm
Throat Depth	170 mm
Space Requirement	Table approx. 1500x 800 mm, height 750mm
Height Adjustment	180 mm
Generator	Cobra XL 35-600/900 Viper XL 35-600/900 Anaconda 35-600/900 DTPS 35-600/900
Rail	Standard linear roller rails on the actuator Dovetail rails on the column
Horizontal Adjustment	Horn/ anvil using the table top with 4 horizontal adjusting nuts
Too Fitting	Horn: Screwed with boosted and clamped using swing door Anvil: With special clamping jaw and T-slot, flange
Pressure Trigger (Optional)	Ultrasonic triggering using differential pressure sensor TIP002 is required
DTM (Optional)	Standard digital travel measurement system. Accuracy ± 0.01 mm TIP002 is required
Connectors	All standard D-sub
Temperature	-5°C ~ 45°C / Stock -20°C ~ 60°C
Design	Switzerland

Catalogue

	LEB-20 Standard
	LEB-20 Digital
	LEB-35 Standard
	LEB-35 Digital
	20kHz ULTRASONIC HAND WELDER
	35kHz ULTRASONIC HAND WELDER

	HOME